Product Specifications
Single-conductor, thermoplastic insulation
| 1007 | 1330 | 1333 | 1591 | 1723 | 10064 | 10369 |
| 1015 | 1331 | 1569 | 1592 | 1901 | 10070 | 10483 |
| 1185 | 1332 | 1577 | 1672 | 10012 | 10269 |
Multiple-conductor, thermoplastic insulation
| 2095 | 2129 | 2468 | 2586 | 2725 | 20233 | 20280 | 20963 |
| 2103 | 2463 | 2517 | 2587 | 2835 | 20276 | 20549 | 21198 |
| 2104 | 2464 | 2576 | 2661 | 2919 | 20279 | 20886 | 21664 |
Single-conductor, thermoset insulation
| 3075 | 3173 | 3320 | 3386 | 3530 | 3689 | 30005 |
| 3123 | 3212 | 3321 | 3398 | 3577 | 3702 |
| 3132 | 3266 | 3331 | 3512 | 3644 | 3817 |
| 3135 | 3271 | 3385 | 3529 | 3674 | 3886 |
Product Standards
The control cable can be produced according to the standard
GB9330-1988, and the factory can also manufacture the cables in
accordance with other international standards.
Scope of Application
These control cables are suitable for electrical control equipment
and instrument wiring, monitoring and control return circuits,
electrical protection and measurement in power distribution units
with rated voltages up to 450/750V AC.
| Brand | LINKE | Cross Section (mm²) | 0.01-500mm² |
| Wire Gauge (AWG) | [e.g., 24AWG, 28AWG] | Conductor | Tinned Copper /bare copper, based on client's requirements |
| Insulation material | PVC/TPU/Silicone rubber/PE/PP/XLPE/Nylon/other | Jacket Material | [PVC/PU/Rubber/Braid/etc.] |
| Certifications | RoHS/REACH/UL/CE/IP68/etc | Custom Length | [e.g., 1m, 3ft, 5m ±5% tolerance] |
| Cable Type | [Medical/Power/Audio/Coaxial/Electrical/Automotive/Energy
storage//etc.] | Shielding | [Shielded/Unshielded/Braid Shield] |
| Impedance | [e.g., 75Ω (for coaxial cables)] | Printing/Logo | [Text/Label/Logo, max. 20 characters] |
| Bend Radius | [e.g., ≥5× cable diameter] | Current Rating | [e.g., 5A] |
| Voltage Rating | [e.g., 30V AC/DC] | Connector Material | [Gold-plated/Nickel-plated/Brass/etc.] |
| Connectors | [e.g., USB Type-C, 3.5mm Jack, RJ45] | Jacket | XLPE or PE or PVC RUBBER |
| Delivery Time | 7-14 days after confirming the order | Colors | [Black/White/Red/Custom Pantone/etc.] |
| temperature | Minus-70℃to 350℃(-70℃ ~ 350℃) | Package | Roll/box/plate/Custom |
| Supporting Services | multicolumn {3}{l}{custom cable, end to end solutions, including
precise cutting, crimping and installation of lugs (specify
material,e.g.,copper/nickel plated) |
|
|
Manufacturer Profile
Wire and cable manufacturer Linke Cable Technology Co., Ltd is a
leading cable supplier in China. With over 10 years of industry
experience, Linke Cable specializes in R&D, production and
marketing of wire and cable products.
We provide various cables and custom cable solutions worldwide,
specializing in:
- EV charging cable
- Medical cable
- Silicone cable
- Spring cable
- Braided cable
- Towlobe cable
- UL wire
- Automotive cable
At Linke Cable, we use an engineer-to-engineer approach to develop
superior cables for customers and improve quality of life through
innovative cable solutions.
Independent Laboratory • Complete Testing Equipment • Full Quality Control
We test every product by strict standards to ensure superior
quality and reliable performance.
No. | Test Item | Test Condition | Test Requirement | Test Data | Result |
1 | Structure Inspection | 1. Comply with wire size table2. Minimum thickness ≥ 80% of average
thickness | Comply with wire size table | Refer to test record | Pass |
2 | Thermal Shock | Wind the sample on an iron rod of specified size, place in an aging
oven at specified temperature for 1 hour, cool the sample to room
temperature for at least 30 minutes, then observe the sample | No cracks on the sample surface | No cracks | Pass |
3 | Heat Deformation | 1. Measure sample thickness (mark measurement position)2. Place
sample and test fixture in aging oven for preheating at specified
temperature for 1 hour3. Place sample under pressure column of test
fixture for 1 hour4. Re-measure sample thickness at the same
position | 1. Sample shall not be cracked by pressure column or expose
conductor2. Thickness reduction ≤ 50% | Refer to test record | Pass |
4 | FT2 | Apply a standard flame at a height of 125mm once | 1. Flame shall not propagate along its length2. Flame shall not
spread to nearby flammable materials | Refer to test record | Pass |
5 | Aging | 1. Take five sections of 200mm-long sheath2. Place specimens in
aging oven at 158℃ for 168 hours3. After taking out specimens,
place at room temperature 23±5℃ for 16 hours, then test elongation
at break and tensile strength | 1. Elongation before aging ≥ 300%, elongation after aging ≥ 80% of
that before aging2. Tensile strength before aging > 1.41kg/mm²,
tensile strength after aging ≥ 80% of that before aging | Refer to test record | Pass |
6 | Cold Bend | Store sample in low-temperature box at specified temperature for 4
hours, wind sample on iron rod of specified size with specified
turns, complete winding within 30 seconds after sample is taken out
of low-temperature box | No cracks on the sample surface | No cracks | Pass |
7 | Conductor Resistance | Measure resistance of one-meter core conductor with DC resistance
meter | At 20℃, resistance of 8AWG ≤ 2.23Ω/km | Refer to test record | Pass |
Linke cable technology (DongGuan) Co. Ltd. concentrate on R&D
and
provide professional solutions to the Cable&Wire,especially for
the
different industry customers.It contains :
Humanoid robot cable,
AI power cable/data cable,
Semiconductor cable/industrial automatic cable,
Sensor cable,
New energy cable,
Medical beauty wire,
UL wire cable,
Linke Cable has diversified product development capabilities and
technical capabilities to support diversified
customer needs. We have obtained the following product
authorization:UL 758,CCC,RoHs,REACH,CE; We
have obtained the following quality management system:ISO 9001-2015(All products); ISO 13485
(Medical apparatus and instruments),IATF 16949(Auto industry)
Quality Certifications
UL Certifications:
Single conductor, thermoplastic insulation: UL1007, UL1185, UL1672,
UL10070, UL10483, UL1015, UL1569, UL10012, UL10269
Multiple conductor certifications:
UL2095, UL2129, UL2468, UL2586, UL2725, UL20233, UL20280, UL20963,
UL2103, UL2463, UL2517, UL2587, UL2835, UL20276, UL20549, UL21198,
UL2104, UL2464, UL2576, UL2661, UL2919, UL20279, UL20886, UL21664
International Standards:
ISO9001, ISO13485, TS16949
CNR Certifications:
Appliance Wiring Material, Extruded PVC Insulated Single, rated
105ºC, 1000V, Class I, Group A, B, or AB, FT1 and/or FT2
Extruded PVC Non-integral Jacketed Cable, rated 105°C, 1000V, Class
I, Class or Class I/II, Group A, B, or AB, FT1 and/or FT2
Extruded TPU Non-integral Jacketed Cable, rated 80°C, 300V, Class
I, Class or Class I/II, Group A, B, or AB, FT1 and/or FT2
Frequently Asked Questions
Are you a manufacturer or trading company?
We are a professional manufacturer. We manage your order from
beginning to end. We welcome visits to our facility and provide
pickup service in Shenzhen.
How can I get a sample to test your quality?
Samples are provided free of charge. New clients are expected to
cover courier costs.
What's your Minimum Order Quantity?
Normally 100m. However, due to the weight of cables, we recommend
ordering suitable quantities to optimize freight costs. Sea
transportation is the most cost-effective option.
Can I get a discount?
Discounts are available based on order quantity. We can offer
competitive pricing and freight arrangements. Please contact us for
details.
Does your company accept OEM production?
Yes, we offer OEM services including printing your company name and
custom quality cards to promote your brand.
