Electrical Installation Cable (RVV)
Application
This cable is used as control and connecting cables for electrical
equipment. It applies to machine tools and complete sets of
equipment for fixed installation.
Cable Construction
Conductors: Flexible ultra-fine stranded copper wire
Insulation: Flexible heat resistant PVC
Insulation Colors:
- Two core: black, white
- Three core: blue, brown, yellow/green
- Four core: black, blue, brown, yellow/green
- Five core and above: black insulated wire with white font
printing
Filler: Cotton or PP filler
Jacket: Flexible heat resistant PVC mixture
Product reference standard: GB/T5023; JB8734
Note: Cables having more than 3 cores contain yellow/green wire
Product Features
- Good mechanical properties
- Excellent electrical insulation capability and chemical resistance
- Fire resistance meets IEC60332-1 standard
Cross Section
Technical Data
Temperature Range:
- Bend: -5℃ to +70℃
- Static: -15℃ to +70℃
Rated Voltage:
- CCC: 300/300V, 300/500V
- IEC/VDE < 1.5mm²: 300/300V
- IEC/VDE ≥ 1.5mm²: 300/500V
Test Voltage: ≥0.5mm² 2500V/5min
Insulation Resistance: 20℃ ≥ 10MΩ/km
Minimum Bending Radius:
- Fixed: 6D (D=cable diameter)
- Moving: 15D (D=cable diameter)
Torsion Angle: ±90°/m
Moving: ±90°/m
Standards & Compliance
The control cable can be produced according to the standard
GB9330-1988, and we can also manufacture cables in accordance with
other international standards.
Scope of Application
These control cables are suitable for electrical controlling
equipment and instrument wiring, monitoring and controlling return
circuits, electrical protection and measurement in power
distribution units with rated voltage up to 450/750V AC.
Company Profile
Wire and cable manufacturer Linke Cable Technology Co., Ltd is a
leading cable supplier in China. For over 10 years, Linke Cable has
focused on R&D, production and marketing of wire and cable. We
provide various cables and custom cable solutions worldwide,
specializing in EV charging cable, medical cable, silicone cable,
spring cable, braided cable, towlobe cable, UL wire, automotive
cable, and more.
| Brand | LINKE | Cross Section (mm²) | 0.01-500mm² |
| Wire Gauge (AWG) | [e.g., 24AWG, 28AWG] | Conductor | Tinned Copper /bare copper, based on client's requirements |
| Insulation material | PVC/TPU/Silicone rubber/PE/PP/XLPE/Nylon/other | Jacket Material | [PVC/PU/Rubber/Braid/etc.] |
| Certifications | RoHS/REACH/UL/CE/IP68/etc | Custom Length | [e.g., 1m, 3ft, 5m ±5% tolerance] |
| Cable Type | [Medical/Power/Audio/Coaxial/Electrical/Automotive/Energy
storage//etc.] | Shielding | [Shielded/Unshielded/Braid Shield] |
| Impedance | [e.g., 75Ω (for coaxial cables)] | Printing/Logo | [Text/Label/Logo, max. 20 characters] |
| Bend Radius | [e.g., ≥5× cable diameter] | Current Rating | [e.g., 5A] |
| Voltage Rating | [e.g., 30V AC/DC] | Connector Material | [Gold-plated/Nickel-plated/Brass/etc.] |
| Connectors | [e.g., USB Type-C, 3.5mm Jack, RJ45] | Jacket | XLPE or PE or PVC RUBBER |
| Delivery Time | 7-14 days after confirming the order | Colors | [Black/White/Red/Custom Pantone/etc.] |
| temperature | Minus-70℃to 350℃(-70℃ ~ 350℃) | Package | Roll/box/plate/Custom |
| Supporting Services | multicolumn {3}{l}{custom cable, end to end solutions, including
precise cutting, crimping and installation of lugs (specify
material,e.g.,copper/nickel plated) |
|
|
Independent Laboratory • Complete Testing Equipment • Full Quality Control
We test every product by strict standards to ensure superior
quality and reliable performance.
No. | Test Item | Test Condition | Test Requirement | Test Data | Result |
1 | Structure Inspection | 1. Comply with wire size table2. Minimum thickness ≥ 80% of average
thickness | Comply with wire size table | Refer to test record | Pass |
2 | Thermal Shock | Wind the sample on an iron rod of specified size, place in an aging
oven at specified temperature for 1 hour, cool the sample to room
temperature for at least 30 minutes, then observe the sample | No cracks on the sample surface | No cracks | Pass |
3 | Heat Deformation | 1. Measure sample thickness (mark measurement position)2. Place
sample and test fixture in aging oven for preheating at specified
temperature for 1 hour3. Place sample under pressure column of test
fixture for 1 hour4. Re-measure sample thickness at the same
position | 1. Sample shall not be cracked by pressure column or expose
conductor2. Thickness reduction ≤ 50% | Refer to test record | Pass |
4 | FT2 | Apply a standard flame at a height of 125mm once | 1. Flame shall not propagate along its length2. Flame shall not
spread to nearby flammable materials | Refer to test record | Pass |
5 | Aging | 1. Take five sections of 200mm-long sheath2. Place specimens in
aging oven at 158℃ for 168 hours3. After taking out specimens,
place at room temperature 23±5℃ for 16 hours, then test elongation
at break and tensile strength | 1. Elongation before aging ≥ 300%, elongation after aging ≥ 80% of
that before aging2. Tensile strength before aging > 1.41kg/mm²,
tensile strength after aging ≥ 80% of that before aging | Refer to test record | Pass |
6 | Cold Bend | Store sample in low-temperature box at specified temperature for 4
hours, wind sample on iron rod of specified size with specified
turns, complete winding within 30 seconds after sample is taken out
of low-temperature box | No cracks on the sample surface | No cracks | Pass |
7 | Conductor Resistance | Measure resistance of one-meter core conductor with DC resistance
meter | At 20℃, resistance of 8AWG ≤ 2.23Ω/km | Refer to test record | Pass |
Linke cable technology (DongGuan) Co. Ltd. concentrate on R&D
and
provide professional solutions to the Cable&Wire,especially for
the
different industry customers.It contains :
Humanoid robot cable,
AI power cable/data cable,
Semiconductor cable/industrial automatic cable,
Sensor cable,
New energy cable,
Medical beauty wire,
UL wire cable,
Linke Cable has diversified product development capabilities and
technical capabilities to support diversified
customer needs. We have obtained the following product
authorization:UL 758,CCC,RoHs,REACH,CE; We
have obtained the following quality management system:ISO 9001-2015(All products); ISO 13485
(Medical apparatus and instruments),IATF 16949(Auto industry)
Frequently Asked Questions
Are you a manufacturer or trading company?
We are a professional manufacturer. We can control your order from
beginning to end. Welcome to visit us - we'll pick you up in
Shenzhen.
How can I get a sample to test your quality?
Samples are free for you. New clients are expected to pay for
courier costs.
What's your Minimum Order Quantity?
Normally 100m. However, cable is very heavy. We recommend ordering
a suitable quantity to avoid high freight costs. Sea transportation
is the best option.
Can I get a discount?
Discounts depend on your quantity. We can offer discounts and cover
freight costs for larger orders. Please contact us for details.
Does your company accept OEM production?
Yes, we can print your company name and even customize quality
cards to promote your company.
